Setting The Clock - Samsung RCD-S75S Instruction Manual

Setting the Clock

For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
Press Clock /Timer twice.
Result: CLOCK is displayed.
2
Press Program/Set.
Result: The hour flashes.
3
To...
Increase the hours
Decrease the hours
4
When the correct hour is displayed,
press Program/Set.
Result: The minutes flash.
5
To...
Increase the minutes
Decrease the minutes
6
When the correct time is displayed, press
Program/Set.
Result: The clock starts and is displayed, even
when the system is in standby mode.
You can display the time, even when you are using another function, by press-
ing Clock/Timer once.
1 2,4,6 3,5
Press...
Press...
6
GB