Using PCTV 40i/50i/110i Hardware
Connect one internal audio cable plug to the internal audio output terminal of
the PCTV 40i/50i/110i card and the other plug to the internal audio input
terminal of your sound card.
Plug the card into the PCI slot. To do so, hold the card at the top and push it
down into the slot while applying even pressure at both ends. Press down on
the upper edge so that the card fits firmly in the slot.
If you cannot easily insert the card into the slot, do not use force since this
may bend the contact springs on the socket connector. Instead, remove the
card and try to insert it again.
After Installation
After you have inserted the hardware, tighten the card retaining bracket
firmly on the back of the computer.
Now place the cover onto your computer and connect the peripheral devices.
6