Table of Contents
Advertisement
FIGURE D
To Charge The Battery:
1.
THE INITIAL CHARGING TIME FOR THE BATTERY IS 10 TO 12 HOURS. The
Battery for this product has been partially charged by the manufacturer, and
therefore requires an initial charging time of only 10 to 12 hours. Do not exceed
12 hours initial charging time. THEREAFTER, each subsequent charging time for
the Battery may take up to 15 HOURS. Do not exceed 15 hours for any
subsequent charging of the Battery.
2.
To charge the Battery (9), plug the 6 Volt DC Adapter Transformer Output Line (10)
directly into the Charging Receptacle located on the side of the Battery. (See
Figures A, and E, next page.)
3.
Plug the 6 Volt DC Adapter Transformer (10) into a grounded, 3-Hole, 120 Volt
electric outlet. (See Figure A.)
4.
Follow the directions in Step #1 to fully charge the Battery (9).
5.
When the charging process is completed, disconnect the 6 Volt DC Adapter
Transformer (10) from the grounded, 3-Hole, 120 Volt electric outlet.
(See Figure A.)
6.
Disconnect the 6 Volt DC Adapter Transformer Output Line (10) from the Charging
Receptacle on the Battery (9). (See Figures A, and E.)
SKU 03514/92927
FRAME (12)
BATTERY
HARNESS
SUPPLY WIRE
(15)
For technical questions, please call 1-800-444-3353.
BOLT (13)
NUT (14)
WIRING
(16)
FRONT END
CHASSIS (11)
Page 8
Advertisement
Table of Contents
