Table of Contents
Advertisement
Using Graphical User Interface (GUI) screens
Unit information
Play Menu
A-B repeat [RAM] [DVD-A] [DVD-V]
(When the elapsed play time is displayed)
Repeat a section between points A and B within an item.
[ENTER] (start point)
To cancel: [ENTER]
≥Subtitles recorded around A and B may fail to appear.
≥The end of an item becomes point B when it is reached.
≥A-B repeat is canceled when you press [QUICK
REPLAY].
Repeat mode
[RAM] [DVD-A] [DVD-V]
(When the elapsed play time is displayed)
[JPEG]
[RAM]
PG: Program
§2
D:
Disc
OFF
[VCD]
[CD] [WMA] [MP3]
§1
T:
Track
§2 §4
D:
Disc
S:
Sequential
OFF
§1
"1 (1 Step)" during program play: repeats the current
program item.
§2
"A (All)" during program and random play.
"S (Sequential)" appears instead of "A" if Sequential
mode is on to repeat play of all loaded discs (except
DVDs).
§3
During play list play
§4
"G (Group)" when Sequential mode is off [WMA] [MP3]
§5
Appears only when Sequential mode is on.
≥You can also repeat play of content ("C") and group ("G")
on HighMAT discs.
≥If the Video CD has playback control
1. Press [∫] to clear "PBC" from the display.
2. Press the numbered buttons to select a track to start play.
3. Select an item to repeat.
≥To repeat only your favorite programs/tracks/
chapters
Start program play (
Play mode display
[RAM] [DVD-A] [DVD-V]
---:
Normal play
RND: Random play
Marker
[RAM] :
999 positions
[DVD-A] [DVD-V]
[ENTER] (The unit is now ready to accept markers.)
To mark a position:
To mark another position: [2, 1]
To recall a marker:
To erase a marker:
[RAM]
To mark the eleventh point and beyond
1. Press [2, 1] to select the marker pin
icon
2. Press [3, 4] to select "11–20"
≥You can select the next group when the current group
is full.
3. Press [1].
≥The markers are ordered by time. This means that the
marker numbers can change when you add and erase
markers.
≥If places have been marked (e.g., with a DVD video
recorder), they are displayed.
≥You can clear existing markers, but they are restored
when you change the disc or switch the unit to standby.
≥This feature doesn't work while using a play list.
[Note]
≥This feature doesn't work during program and random
play.
≥Markers you add clear when you change the disc or
switch the unit to standby.
14
[VCD]
[CD] [WMA] [MP3]
[ENTER] (finish point)
[VCD]
[CD] [WMA] [MP3]
[DVD-A]
[DVD-V]
§1
§3
§1
S:
Scene
T: Track
C: Chapter
§3
§2
PL: Playlist
G: Group
T: Title
OFF
OFF
[JPEG]
G: Group
OFF
§5
page 9) and display "A".
[VCD]
[CD] [WMA] [MP3]
PGM: Program play
[VCD]
[CD] [WMA] [MP3] [JPEG] : 5 positions
[ENTER] (at the desired point)
[ENTER]
[2, 1]
[ENTER]
[2, 1]
[CANCEL]
Picture Menu
Picture mode
N:
C1:
C2:
U1/U2: User mode (
Video output mode
480I: Interlace video
480P: Progressive video
(¢: Progressive output not possible with PAL signals)
≥You can change the video output mode only when "Video
Out (AV/Component)" is set to "Y PB PR" and only when
"Progressive Out (Component)" is set to "Enable (NTSC
§1
Disc Only)" in the SETUP menu. (
§2
Transfer mode
Select the method of conversion for progressive output to
suit the type of material being played. (
Glossary—Film and video)
Auto1 (normal): For viewing film material
Auto2: For viewing film material (the same as Auto1, but
Video:
∫ User mode
Press [1] while "U1" or "U2" is highlighted and then press [3, 4] to
select "1" or "2".
U1: User mode 1
Contrast (j7 to i7)
Adjusts the contrast between light and dark parts of the
picture.
Brightness (0 to i15)
Adjusts the picture brightness.
Sharpness (j7 to i7)
Adjusts the sharpness of the edges of the horizontal lines.
Colour (j7 to i7)
Adjusts the shade of the picture's colour.
Gamma (0 to i5)
Adjusts the brightness of dark parts of the picture.
U2: User mode 2
(Video output mode
1–10
Normal mode
Mellows images and enhances detail in dark
scenes
Sharpens images and enhances detail in dark
scenes
below)
page 16)
able to convert 30-frame-per-second progressive
video)
For video material
above)
back cover,
Hide quick links:
Advertisement
Table of Contents
