Panasonic DVD-S24 Operating Instructions Manual page 14

Playback functions
14
Chapter review
This function lets you browse back through the chapters of a
DVD-V by playing the first couple of seconds of every chapter.
Press STOP during playback.
Press PLAY .
A message appears: Press PLAY to Chapter Review.
Press PLAY again.
The first couple of seconds of every chapter are played back. Normal playback is
resumed at the point where you stopped it.
Do not press PLAY if you do not wish to browse back through the chapters.
After a couple of seconds, normal playback will be automatically resumed at
the point where it was stopped.
POSITION MEMORY
Use the Position Memory function to resume disc playback at a set position.
You can tag and directly access up to 5 discs.
The position tag is retained when you change discs or when the unit goes into
stand-by mode.
Press POSITION MEMORY during playback.
A message appears: Position memorized.
You can now change discs or go into stand-by mode.
Press PLAY to play back the disc again. Playback is resumed at the stored
position and the position tag is cleared.
Some discs do not fully support all of this function.
Video CD CD RAM
DVD-Video
DVD-Video
MP3 WMA JPEG