And Settings; Digital Settings - Panasonic DVD-PV55 Operating Instructions Manual

Digital settings

Preparation
Turn on this unit and the equipment you have
connected.
(For details, see below)
MPEG is not available.
For Asia
∫ To return to the previous menu
Press [RETURN].
Settings
∫ PCM Down Conversion: Output during play of DVDs recorded in 96 kHz linear PCM.
No : When you have connected an amplifier with stereo phono cables
Yes: When you have connected an amplifier with an optical fiber cable
Yes: Copyright protection limits digital output to 48 kHz/16 bit
When playing DVDs recorded in 96 kHz
Sound is output as follows in accordance with the connections and settings you have made.
Connection
Setting
No
Yes
§The connected equipment must be able to handle 96 kHz LPCM in order to take advantage of the
high quality audio found on these discs.
∫ Dolby Digital: Output during play of DVDs recorded with Dolby Digital.
Bitstream: When you have connected a unit with a built-in Dolby Digital decoder
PCM : When you have connected a unit that doesn't have a built-in Dolby Digital decoder
∫ DTS Digital Surround: Output during play of DVDs recorded with DTS Digital Surround.
PCM : When you have connected a unit that doesn't have a built-in DTS decoder
Bitstream: When you have connected a unit with a built-in DTS decoder
∫ MPEG : Output during play of DVDs recorded with MPEG.
§
PCM : When you have connected a unit that doesn't have a built-in MPEG audio decoder
Set "7 Speaker Setting" to "2-channel" in this case (
intended for the surround and center speakers may not be heard if this is not done.
Bitstream: When you have connected a unit with a built-in MPEG audio decoder
42
MPEG is not available.
§ For Asia
VQT8645
Factory Preset
Analogue
Output as 96 kHz
Converted and output as 48 kHz/16 bit
While stopped
1
Press [SETUP] or [MENU] to
show the initial settings screen.
2
Use the cursor jockey [3, 4] to
select "6 Digital Audio Output"
and press [ENTER].
3
Use the cursor jockey [3, 4] to
select an
[ENTER]. (For details, see below)
4
Press [RETURN] to complete the
settings.
No output
(Audio will be output at 96 kHz if the
DVD has not had copyright protection
recorded on it. )
§
Converted and output as 48 kHz/16 bit
page 40, "Speaker settings"). Sound
item and press
Digital