Lan - Panasonic Toughbook CF-48 Series Reference Manual

LAN

(Model with both an internal modem and an internal LAN port)
Using LAN
Windows 98 Windows 2000
Windows NT ( page
Setting LAN
Windows 98
1
Select [Device Manager] in [Start] - [Settings] - [Control Panel]
- [System]
2
Select [Intel 8255x-based PCI Ethernet Adapter (10/100)] in [Net-
work adapters], select [Properties]
3
Remove a check mark [Disable in this hardware profile], press
[OK] and press [Close]
4
Restart the computer
Using the computer as a network computer
When using the computer as a network computer, some additional settings may have to
be made depending on the usage conditions. We recommend asking your system ad-
ministrator or the person in charge of the network.
NOTE
Do not use standby or hibernation functions during communications.
Unable to connect to network (When the indicator of your HUB unit does not
light):
Windows 98
1 Select [Network] in [Start] - [Settings] - [Control Panel].
2 Select [Intel 8255x-based PCI Ethernet Adapter (10/100)].
3 Select [Properties].
4 Select [Advanced].
5 Select [Link Speed & Duplex] from [Property], and set [Value] to the communi-
cation speed (10 Mbps or 100 Mbps) suitable for your HUB unit, and then
press [OK].
Windows 2000
1 Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] -
[Hardware].
2 Select [Intel 8255x-based PCI Ethernet Adapter (10/100)] from [Network adapt-
ers].
3 Select [Action] - [Properties]
4 Select [Advanced].
5 Select [Link Speed & Duplex] from [Property], and set [Value] to the communi-
cation speed (10 Mbps or 100 Mbps) suitable for your HUB unit, and then
press [OK].
40)
39
Windows 98 Windows 2000