External Display - Panasonic Toughbook CF-48 Series Reference Manual

External Display

External Display Port
1
Power off your computer
Do not shut down using the standby or hibernation mode.
2
Connect the external display to your computer
NOTE
For more detailed information, refer to the operation manual of the
external display.
3
Turn on the external display, then turn on your computer
NOTE
When an external display is connected, the computer displays on
both the internal LCD and the external display after Windows starts
up regardless of the [Display] setting in the Setup Utility.
It is possible to change the setting to display only on the external
display or only on the internal LCD with the Fn + F3
However, in the following cases, the setting cannot be changed with
the Fn + F3 keys.
- When either the internal LCD or external display is set to [Sec-
ondary] in [Displays] of Display Properties.
- Windows 98 When the computer is in the Dual-Display mode.
(
Windows 98 Windows 2000
4
Select your external display
Set your external display for [Monitor] in [Start] - [Settings] - [Control
Panel] - [Display] - [Settings] - [Advanced].
When a monitor that does not conform to the Plug & Play standards is
connected, select [Change]* and make the monitor settings.
* Windows 2000 : [Monitor] - [ Properties] - [Driver] - [Update Driver].
NOTE
For more detailed information, refer to the operation manual of the exter-
nal display.
( "Starting Up/Shutting Down")
page 33)
32
keys.