Auto Power Standby Function - Panasonic Viera TX-P42S30E Operating Instructions Manual

TV
2
3
1
4
5
6
7
8
9
10
CI slot (p. 50)
1
Function select
2
•
[Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass] ∗ / [Treble] ∗ /
[Balance] / [Auto Setup] (p. 38, 39)
∗ [Music] or [Speech] mode in the Sound Menu
3 Channel Up / Down, Value change (when using the F
button), Switching the TV On (press either button for
about 1 second when in Standby mode)
4 Changes the input mode
5 USB 1 / 2 port
6 SD Card slot
7 HDMI3 terminal
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
Operation guide
Operation guide will help you to operate by using the
remote control.
Example : [Sound Menu]
Main Menu
Mode
Picture
Bass
Treble
Sound
Balance
Headphone Volume
Timer
Surround
Auto Gain Control
Setup
Volume Correction
Speaker Distance to Wall
Select
Selects the basic sound mode.
EXIT
Change
RETURN
Operation guide

Auto power standby function

The TV will automatically go to Standby mode in the following conditions :
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• [Off Timer] is active in the Timer Menu (p. 20)
• no operation is performed for the period selected in [Auto Standby] (p. 34)
•
This function does not affect the recording of Timer Programming and Direct TV Recording.
10
11 12 13
(p. 81)
(p. 53)
(p. 81)
- Operation guide
Music
Off
Off
Over 30cm
Page up
Page down
8 Headphones jack
9 AV2 terminals
10 Mains power On / Off switch
•
Use to switch the mains power.
If you turned the TV Off during Standby mode by the
remote control last time, the TV will be in Standby
mode when you turn the TV On with Mains power On
/ Off switch.
11 Remote control signal receiver
•
Do not place any objects between the TV remote
control signal receiver and remote control.
12 C.A.T.S. (Contrast Automatic Tracking System)
sensor
•
Senses brightness to adjust picture quality when [Eco
Mode] in the Picture Menu is set to [On]
13 Power and Timer LED
•
Red : Standby
Green : On
Orange : Timer Programming On
Orange (flash) :
Recording of Timer Programming or Direct TV
Recording in progress
Red with orange flash :
Standby with Timer Programming On or Direct
TV Recording
•
The LED blinks when the TV receives a command
from the remote control.
How to use remote control
MENU
Open the main menu
Move the cursor / select the menu item / select from a
1/2
range of options
0
Move the cursor / adjust levels / select from a range
0
0
of options
11
Access the menu / store settings after adjustments
0
have been made or options have been set
BACK/
RETURN Return to the
previous menu
(p. 81)
(p. 81)
(p. 31)
Exit the menu system
EXIT
and return to the
normal viewing screen