Osd Language - Panasonic QuintrixF TX-29PX10D Operating Instructions Manual

Q- -LINK
To share tuning information
To ensure correct recordings are made, the television and VCR should share tuning information -- see
page 19.
D Whenever the Auto setup (ATP) function is used, tuning data will be downloaded to the VCR.
Auto Power functions
With Panasonic Q--Link VCRs these additional features are available:
D If you insert a tape in your VCR and press the Play button, the television will automatically switch on
and select the AV2 input so you can view the tape.
D If you switch off the television whilst the VCR is in Stop, Fast Forward or Rewind modes, the VCR will
switch off automatically.
To turn off Q- -Link communication
If you do not wish to use the Q--Link feature, go to the Setup menu and set the Q--Link option to "Off".
See page 14.
Important Note:
Not all VCRs support this type of data communication system. Some may support certain features,
but not others. See the VCR handbook for further information.
If Q--Link is inoperative, first confirm that your SCART lead is a full function type. Ask your dealer for
further details.

OSD LANGUAGE

When you first installed the TV the On Screen Display language was set
according to your choice of country. If you wish to use a different language
then it can be chosen from the OSD language menu
Open the Setup menu
Move to the OSD language menu
Access the OSD language menu
Move to your choice
Press the TV/AV button to select
and exit
SET UP
OSD language
Deutsch
English
Français
Italiano
ELLHNIKA
Čeština
Română
TV/AV
Polski
Espańol Nederlands
Norsk Suomi
Dansk Türkçe
Svenska Portuguęs
Magyar Hrvatski
Russkij Bulgarian
Slovensky Slovensko
Nemački
23