Panasonic Viera TX-P42UT30J Operating Instructions Manual page 42

Menu Item
Standby Power Save
Intelligent Auto
Standby
Download
Child Lock
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
Favourite Network
New Channel
Message
Service Replacement
Signal Condition
Attenuator
Add TV Signal
Adjustments / Configurations (alternatives)
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption [Off] / [On] (p. 84)
•
This function is available when [VIERA Link] is set to [On] and [Power off Link] is set
to [On].
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p. 84)
•
This function is available when [VIERA Link] is set to [On].
Downloads channel, language, country / region settings to a Q-Link or VIERA Link
compatible equipment connected to the TV
•
DVB-C channel settings cannot be downloaded.
Locks a channel / AV input to prevent access to it (p. 56)
Creates list of favourite DVB-C channels (p. 47)
Skips the unwanted DVB-C channels or edits DVB-C channels (p. 48)
Automatically sets the DVB-C channels supplied (p. 45)
Sets the DVB-C channels manually (p. 49)
Updates DVB-C Channel List while keeping your settings (p. 50)
Selects your favourite network for each broadcasters (only available in some countries)
Selects whether to give a notification message when a new DVB-C channel is found
[Off] / [On] (p. 50)
Set to [On] to enable a message to switch to the available service (only available in
some countries) [Off] / [On]
Checks the DVB-C signal condition (p. 50)
Automatically reduces the DVB-C signal to avoid the interference [Off] / [On] (p. 50)
Adds the TV mode
•
This function is available if you skip any modes to tune in [Auto Setup] for first using
the TV.
•
To operate, refer to the "Auto Setup" operations for first using the TV (p. 13, 14).
41