Panasonic Viera TX-L32E30E Operating Instructions Manual page 36

Menu Item
Banner Display
Timeout
VIERA Connect
Banner
Playing Time Display
Radio Mode
Common Interface
Network Setup
DivX® VOD
USB Keyboard
Layout
Shipping Condition
System Update
Software Licence
System Information
Update
Postcode
System
Information
Power on Preference
Power Save
Time Zone
•
A different menu will be displayed in the mode of PC input, Media Player or network service operations. (p. 52, 58 - 68,
76 - 79)
•
Only available items can be selected.
36
Adjustments / Configurations (alternatives)
Sets how long the Information banner (p. 18) stays on screen
[0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] / [7] / [8] / [9] / [10] (seconds)
Sets the VIERA Connect introduction banner display [Off] / [On] (p. 16, 17)
Set to [On] to display a continuous record of time spent using Game mode every 30
minutes [Off] / [On]
•
This function is available when [Game] is selected in [Viewing Mode]
Sets the timer for turning off the screen automatically when a radio channel is selected
[Off] / [5] / [10] / [15] / [20] (seconds)
•
The sound is active even if the screen turns off.
•
Press any buttons except Standby, Volume Up / Down and Sound Mute buttons to
turn the screen on.
•
This function is effective in reducing power consumption when listening to a radio
channel.
•
DVB mode only
Uses include to watch encrypted channels (p. 49)
Sets the network setting to use in your network environment (p. 71)
Displays DivX VOD registration code (p. 94)
Selects the language that your USB Keyboard supports
•
For the information of using USB Keyboard
Resets all settings, for example, when moving house (p. 50)
Downloads new software to this TV (p. 51)
Displays the software licence information
Displays the system information of this TV
Performs the update of the GUIDE Plus+ schedule and advertising information for the
GUIDE Plus+ system (p. 22)
Sets your postcode to display advertisements in the GUIDE Plus+ system (p. 22)
Displays the system information of the GUIDE Plus+ system
Automatically selects the input when the TV is turned on [TV] / [AV]
Set to [TV] to view picture from TV tuner.
Set to [AV] to view input from an external equipment connected to the AV1 or HDMI1
terminal, e.g. set top box.
•
The external equipment must be switched on and sending a control signal for
automatic switching at power on to occur.
Reduces brightness of picture to economise on power consumption [Off] / [On]
Adjusts the time data
•
The time data will be corrected based on GMT.
•
Set to [Auto] to adjust the time automatically according to your area.
(p. 30)
(p. 97)