Panasonic Viera TX-L32E30E Operating Instructions Manual page 33

Menu Item
SPDIF Selection
HDMI1 / 2 / 3 / 4 Input
SPDIF Delay
Reset to Defaults
Timer Programming
Off Timer
Auto Standby
Eco Navigation
Recording Setup
VIERA Link
HDMI Content Type
AV1 out
Adjustments / Configurations (alternatives)
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and
HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto] : Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel are output
as Dolby Digital Bitstream.
MPEG is output as PCM.
[PCM] : Digital output signal is fixed to PCM.
•
For DVB mode, network video contents (p. 77) or Video mode of Media Player (p. 63)
•
ARC (Audio Return Channel) : A function of digital audio output using HDMI cable
Select to fit the input signal [Digital] / [Analogue] (p. 96)
[Digital] : HDMI cable connection
[Analogue] : HDMI-DVI adaptor cable connection
•
HDMI input mode only
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT and HDMI2 (ARC
function) terminals if the sound does not synchronize the image
•
DVB mode only
Press the OK button to reset the present Sound Mode, [Balance], [Headphone Volume]
and [Surround] to the default settings
Sets a timer to remind watching or record forthcoming programmes (p. 44)
•
DVB mode only
Sets the time until the TV automatically goes to Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 19)
Sets the time the TV automatically goes to Standby mode when no operation is
performed for the selected times [Off] / [2] / [4] (hours)
•
Starting Timer Programming automatically does not affect this function.
•
Automatic input switching with the connected equipment affects this function and
time-count will be reset.
•
The notification message will appear 3 minutes before going to Standby mode.
Automatically sets the TV to the most suitable energy-saving mode
•
If you press the OK button, the following items are set as below :
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save], [Power Save]
[Intelligent Auto Standby]
[Auto Standby] [2 hours]
Formats the connected USB HDD and sets the condition (p. 53)
Sets to use VIERA Link functions [Off] / [On] (p. 83)
Adjusts the picture settings according to the content type signal from the connected
equipment via HDMI cable [Off] / [Auto]
•
This function is available if the connected equipment supports HDMI Content Type.
•
The content type information will be displayed for several seconds when this function
works.
Chooses the signal to be transmitted from the TV to Q-Link [TV] / [AV2] / [Monitor]
[Monitor] : Image displayed on screen
•
Component, PC and HDMI signals cannot be output.
[On (No reminder)]
[On]
33