Wireless Connection Settings - Panasonic Viera TX-L32E31B Operating Instructions Manual

4
Select [Connection Test] and access to test
Network Setup
Connection Test
Network Type
Access Point Settings
IP/DNS Settings
Network Link Settings
Software Update
MAC Address
Connection Test
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA Connect.

Wireless connection settings

This setting is for the network connection by using the Wireless LAN Adaptor. (Wireless connection)
•
Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the manual of
the access point.
1
Select [Network Type] and set to [Wireless]
Network Setup
Connection Test
Network Type
Access Point Settings
IP/DNS Settings
Network Link Settings
Software Update
MAC Address
2
Select [Access Point Settings]
Network Setup
Connection Test
Network Type
Access Point Settings
IP/DNS Settings
Network Link Settings
Software Update
MAC Address
3
Select the connection type and set
Connection Type
Please select network connection type.
WPS(Push button)
WPS(PIN)
Search for access point
Manual
4
Confirm the connection status of [Access Point Settings]
Network Setup
Connection Test
Network Type
Access Point Settings
IP/DNS Settings
Network Link Settings
Software Update
MAC Address
74
Access
Wired
---
•
Performs automatic testing of the network connection for the TV. (It takes a
while to test.)
ab-cd-ef-gh-ij-kl
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections, and then perform this function again.
Wireless
No settings
ab-cd-ef-gh-ij-kl
Wireless
No settings
ab-cd-ef-gh-ij-kl
•
For details of each connection type
•
After settings, return to [Network Setup] screen
Wireless
Connected
[Connecting...] : Connecting to the access point in progress.
ab-cd-ef-gh-ij-kl
[USB overcurrent] : Overcurrent error
select
access
select
access / store
select
access
select
access
- - - : [Wired] is selected in [Network Type].
[No adaptor] : Wireless LAN Adaptor is not connected.
[No settings] : Setting for connecting to the access point has not been set.
[Connected] : Wireless connection to the access point succeeded
•
To display the current access point settings, press the OK
button.
To change the settings, select [No] on this screen.
•
Some access points do not allow access to the internet.
Perform [Connection Test] (p. 75) to check if internet
connection is available.
(p. 75, 76)
(p. 102)