Watching External Inputs
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the AV input.
•
To connect the equipment
The Remote Control is capable of operating some functions of selected external equipment.
"Operating the equipment with the TV remote control" (p. 28)
TV
■
To return to TV
TV
Terminal
AV1
Manual input
AV1
(default setting
AV1-RGB
in "Input Labels")
Auto input
EC/AV1
(EC mode or
EC/AV1-RGB
VIERA Link)
•
If the above information is permanently displayed on the top left of the screen, press the button to clear.
Note
•
If the external equipment has an aspect adjustment function, set it to [16:9].
•
For details, see the manual of the equipment or ask your local dealer.
(p. 10, 11, 89 - 91)
Turn the TV on
1
When connecting with SCART as example 2 or 3 (p. 10, 11)
Receives input signals automatically when playback starts
•
Input signals are automatically identified by the SCART (pin 8) terminal.
•
This function is also available for HDMI connections (p. 89).
If input mode is not switched automatically
2
3
Perform
and
•
Check the setup of the equipment.
Display the input selection menu
2
AV
Select the input mode connected to the equipment
3
Input Selection
AV1
AV2
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
SD Card/USB
•
You can also select the input using the AV button on the remote control or the side
panel of the TV (except [SD Card/USB]).
Press the button repeatedly until the desired input is selected.
•
[SD Card/USB] : Switches to Media Player
•
You can label or skip each input mode (except [SD Card/USB]).
Skipped inputs will not be displayed when the AV button is pressed.
View
4
AV1
AV2
COMPONENT
AV2
COMPONENT
−
−
[Using Media Player] (p. 58)
Displays the selected mode
PC
HDMI1
HDMI2
PC
HDMI1
HDMI2
EC/HDMI1
EC/HDMI2
Applicable for
Applicable
−
EC mode and
VIERA Link
VIERA Link
select
watch
"Input Labels" (p. 48)
HDMI3
HDMI3
EC/HDMI3
Applicable
Applicable
for
for
VIERA Link
HDMI4
HDMI4
EC/HDMI4
for
VIERA Link
27