Grease And Lubricate - Cub Cadet Sc2400 Operator's Manual

■ Grease and Lubricate

IMPORTANT: Prevent damage.
●Use the recommended Cub Cadet Yanmar
greases to avoid failed or prematurely worn parts
and components.
●The recommended Cub Cadet Yanmar greases
perform efficiently in an average ambient
temperature range from –20 to +275 °F (–29 to
+135 °C)
●When operating the tractor outside this
temperature range, contact your local Cub Cadet
Yanmar dealer for applicable special-purpose
greases.
Use Cub Cadet 251H EP Grease or General all
purpose grease NLGI grade No.2 or equivalent.
1. Lubricate Lube Fittings on the Tractor
[Extremely wet or muddy conditions]
Lubricate the lube fittings once every 10 operating
hours or once a day.
[All other conditions]
Lubricate the lube fittings once every 50 operating
hours.
(A) Forward and reverse drive pedal rod end
2. Lubricate the Implement Control Lever Linkage
(A) Lubricate the implement control lever linkage
Lubricate the implement control lever linkage with
Cub Cadet GEAR LUBE.
14. PERIODIC SERVICE
P3014924
P3014925
14-24
(A)
(A)
Sc2400 Operator's Manual