Start The Engine; Opening/Closing The Fuel Shut-Off Valve; Adjust The Operator's Seat; Reverse The Operator's Seat - Cub Cadet Sc2450 Operator's Manual

1. Start the Engine

1. Open the fuel shut-off valve.
■ Opening/Closing the Fuel Shut-Off
Valve
●To open the valve, turn the valve lever to the
vertical position.
●To close the valve, turn the valve lever to the
horizontal position.
(A) Valve lever
(O) Open
(C) Close
2. Sit on the seat.

■ Adjust the Operator's Seat

1. Engage the parking brake securely and stop the
engine.
2. Sit on the seat.
3. Pull the seat adjustment lever to the left.
4. Move the seat forward and backward to find the
optimal position and then release the seat
adjustment lever.
5. While remaining seated, confirm that various
control levers can be comfortably operated. If any
control lever cannot be operated comfortably,
readjust the seat position as necessary.
(A) Seat adjustment lever
IMPORTANT
●After adjusting the seat position, always make sure
that the seat is securely locked in place.

■ Reverse the Operator's Seat

The following procedure can be used to turn the
operator's seat around for backhoe operation.
(A) Operator's seat
(position for driving the tractor and operating
the front loader)
(B) Operator's seat
(position for backhoe operation)
7. OPERATE THE ENGINE
3014908a
3016414c
3016410
7-2
(C)
(O)
(A)
(B)
Sc2450 Operator's Manual
(A)
(A)