Every 300 Hours; Transmission/Hydraulic Oil; Change The Transmission/Hydraulic Oil And Replace The Transmission/Hydraulic Oil Filter - Cub Cadet Sc2450 Operator's Manual

7. Every 300 Hours

■ Transmission/Hydraulic Oil

IMPORTANT: Avoid damage.
●Make sure to use Cub Cadet Hydraulic/Transmission
Fluid for transmission.
Transmission/Hydraulic Oil
Capacities
Approximately Cub Cadet Hydraulic/Transmission
2.0 US gal (7.5 L) Fluid
■ Change the Transmission/Hydraulic Oil and Replace the Transmission/Hydraulic Oil
Filter
! WARNING ! WARNING
●When draining away the transmission/
hydraulic oil that is still hot, stay clear of the
hot transmission/hydraulic oil and other
components to avoid burn.
IMPORTANT: Avoid damage.
●NEVER remove the cap from the fill port unless
absolutely necessary. Contaminated transmission/
hydraulic oil can cause the transmission to be
damaged or fail.
●Whenever changing or replacing the transmission/
hydraulic oil and transmission/hydraulic oil filter,
always bleed the transmission/hydraulic oil in order
to avoid malfunction of transmission.
1. Run the engine for several minutes to warm up
the transmission/hydraulic oil.
2. Park the machine safely.
NOTE
●The transmission contains approximately 2.0 US
gal (7.5 L) of oil.
3. Put a drain pan underneath the transmission
drain plug. Remove the drain plug, and allow the
oil to fully drain away.
(A) Transmission drain plug
14. PERIODIC SERVICE
Lubricants
14-33
(A)
3014923
Sc2450 Operator's Manual