MSI P45D3 PLATINUM Series User Manual page 64

M S-7513 M ainboard
FSB/DRAM Ratio
This item will allow you to adjust the FSB/DRAM Ratio of the memory.
Adjusted DRAM Frequency
It shows the adjusted DRAM frequency. Read-only.
Adjust PCIE Frequency
This field allows you to select the PCIE frequency (in MHz).
Auto Disable DIM M/PCI Frequency
W hen set to [Enabled], the system will remove (turn off) clocks from empty DIMM and
PCI slots to minimize the electromagnetic interference (EMI).
CPU Voltage / CPU GTL REF0 / CPU GTL REF1 / DRAM Voltage /
DDR_VREF_A/B / NB Voltage / NB GTL REF / VTT FSB Voltage / SB Voltage
These items dispaly the power status of Memory, FSB and chipset. Read-only.
Spread Spectrum
W hen the motherboard's clock generator pulses, the extreme values (spikes) of the
pulses create EMI (Electromagnetic Interference). The Spread Spectrum function
reduces the EMI generated by modulating the pulses so that the spikes of the pulses
are reduced to flatter curves. If you do not have any EMI problem, leave the setting at
Disabled for optimal system stability and performance. But if you are plagued by EMI,
set to Enabled for EMI reduction. Remember to disable Spread Spectrum if you are
overclocking because even a slight jitter can introduce a temporary boost in clock
speed which may just cause your overclocked processor to lock up.
Important
1. If you do not have any EMI problem, leave the setting at [Disabled] for
optimal system stability and performance. But if you are plagued by EMI,
select the value of Spread Spectrum for EMI reduction.
2. The greater the Spread Spectrum value is, the greater the EMI is reduced,
and the system will become less stable. For the most suitable Spread
Spectrum value, please consult your local EMI regulation.
3. Remember to disable Spread Spectrum if you are overclocking because
even a slight jitter can introduce a temporary boost in clock speed which
may just cause your overclocked processor to lock up.
3-24