Philips HTS3540 User Manual page 14

This section helps you to change the settings of
your home theater.
‡
0RVW RI WKH VHWWLQJV DUH DOUHDG\ FRQÀJXUHG
with the best value for the home theater.
8QOHVV \RX KDYH D VSHFLÀF UHDVRQ WR FKDQJH D
setting, it is best to leave it at the default value.
Press .
» The following menu appears.
Select a setup menu, then press
See the following sections for information
about how to change the settings of your
home theater.
Press
menu, or press
‡
You cannot change a setting that is grayed out.
Press .
Select
Select and adjust the following settings:
14
.
to return to the previous
to exit.
, then press
‡
‡
‡
‡
‡
‡
‡
Press
‡
Before you purchase DivX videos and play
them on the home theater, register the home
theater on www.divx.com using the DivX
VOD code.
Press
Select
Select and adjust the following settings:
‡
‡
‡
.
‡
: Restricts play to disc.
Password (PIN code) is required to
unlock the disc before play.
: Changes the brightness
of the display panel.
: Selects the on-
screen display menu language.
: Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
: Sets a sleep timer to
switch the home theater to standby
DIWHU D VSHFLÀF WLPH
: Enables or disables
auto standby. If enabled, the home
theater switches to standby after 30
minutes of inactivity (for example, in
pause or stop mode).
DivX VOD registration code for the
home theater.
WR FRQÀUP \RXU FKRLFH
.
, then press
: Sets the volume
of each speaker to obtain the ideal
audio balance.
: Sets the delay time
for center and rear speakers to obtain
an equal audio transmission from all
the speakers.
: Enables or disables
HDMI audio output for the TV.
: Sets a delay for audio
output when you play a video disc.
: Displays the
.