Mr. Coffee APTX83 User Manual page 9

3) Add the desired amount of ground coffee
to the filter. Gently shake the filter insert
to level the ground coffee.
4) Be certain that the filter is centered in
the brew basket. Close the brew basket.
5) Open hinged lid, remove water reservoir and
add the appropriate amount of water. Place
removable water reservoir at the top of the
unit and flush against it. Push down until the
reservoir is firmly placed into the base of the
coffeemaker.
Note: The amount of brewed coffee after the brewing process will always be slightly less
than the amount of water placed into the coffeemaker. Since some water is absorbed by
the coffee grounds and filter. Add a little extra water at the beginning so that you have
the exact number of cups desired or you can remove the water reservoir from the
coffeemaker to fill with cool water.
9