Philips BDL4675XU User Manual page 37

User Manual BDL4675XU
FILM MODE
Note: For VIDEO, S-VIDEO, COMPONENT, and HDMI (video mode) inputs only.
Choose to turn on or off the film mode frame conversion function.
Use the PLUS/MINUS button to toggle between
• AUTO - Enable the film mode frame conversion function for movies and motion pictures. The monitor
converts a 24 frames-per-second (24 fps) input signal format to DVD video signal format. Once this
function is enabled, it is recommended that you set the SCAN CONVERSION function to
PROGRESSIVE.
• OFF - Disable the film mode frame conversion function. This mode is suitable for TV broadcasting and
VCR signals.
IR CONTROL
Select the operation mode of the remote control when multiple BDL4675XU monitors are connected via an
RS232C connection.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
• NORMAL - All monitors can be operated normally by the remote control.
• PRIMARY - Designate this monitor as the primary monitor for remote control operation. Only this
monitor can be operated by the remote control.
• SECONDARY - Designate this monitor as the secondary monitor. This monitor can not be operated by
the remote control, and will only receive the control signal from the primary monitor via RS232C
connection.
• LOCK - Lock the remote control function of this monitor. To unlock, press and hold the DISPLAY
button on the remote control for 5 seconds.
KEYBOARD CONTROL
Choose to enable or disable the function of the keyboard (control buttons) on the monitor.
Use the PLUS/MINUS button to toggle between
• LOCK - Disable the keyboard.
• UNLOCK - Enable the keyboard.
TILING
Note: For VGA input only.
With this function you can create a single large screen matrix (display wall) that consists of up to 25
BDL4675XU monitors (5 monitors each on the vertical and horizontal sides). This requires you to connect
each BDL4675XU monitor in a daisy-chain configuration.
Example:
2 x 2 screen matrix (4 monitors)
H MONITORS = 2
V MONITORS = 2
H MONITORS
5 x 5 screen matrix (25 monitors)
POSITION
RETURN TO THE CONTENTS
H MONITORS = 5
V MONITORS = 5
H MONITORS
POSITION