Table of Contents
Advertisement
7 Other features
Set the alarm timer
You can set two alarms to ring at different time.
(Fig.
)
Note
•
Make sure that you have set the time correctly.
1
Press and hold AL1 or AL2 for 3 seconds
to activate alarm setting mode.
» The alarm icon and the hour digits
blink.
2
Press
/
repeatedly to set the hour.
3
Press AL1 or AL2 to confirm.
» The minute digits blink.
4
Repeat steps 2-3 to set the minute.
5
Repeat steps 2-3 to set the alarm source:
DAB, FM or buzzer.
6
Repeat steps 2-3 to set the alarm volume.
» The alarm icon is displayed.
f
3 sec.
Tip
•
When alarms sounds, volume rises gradually.
•
If DAB is selected as alarm source, while no DAB+
radio station is available, buzzer is activated when alarm
time comes.
Activate/deactivate the alarm timer
1
Press AL1/AL2 to view alarm settings.
2
Press AL1/AL2 repeatedly to activate or
deactivate the alarm timer.
» The alarm icon appears if the alarm
timer is on and disappears if it is off.
•
To stop the ringing alarm, press the
corresponding AL1/AL2.
» The alarm repeats ringing for the next
day.
Snooze the alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing nine
minutes later.
Set the sleep timer
This clock radio can switch to standby mode
automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
appears.
To deactivate the sleep timer:
•
Press SLEEP repeatedly until [OFF] (off)
appears.
15
30
60
OFF
90
120
EN
10
Advertisement
Table of Contents
