Channel Settings - Philips HD TV User Manual


[Picture shift]: Move the position of the
picture. You cannot select this setting if
the selected picture format is [Auto
fill], [Auto zoom], or [Wide screen].

[3D]*: Change the 3D picture format.

[3D depth on/off]*: Enable or disable
3D.

[Switch to 3D]*: Specify the way the
TV switches to 3D.
• Available for certain models only.
More sound settings
You can change the settings in the Sound
menu.
1. Press .
2. Select [Setup] > [TV settings] > [Sound],
then press OK.
3. Select a setting to adjust:

[Smart sound]: Access predefined
smart sound settings.

[Reset]: Reset to factory default
settings.

[Bass]: Adjust the bass level.

[Treble]: Adjust the treble level.

[Surround]: Enable spatial sound.

[Headphones volume]: Adjust
headphone volume.

[Auto volume leveling]: Automatically
reduce sudden volume changes, for
example, when switching channels.

[Balance]: Adjust the balance of the left
and right speakers.

[Digital output format]: Select the type
of audio output through the digital
audio output connector. Select
[Stereo] for stereo sound or
[Multichannel] to output audio to
home theater
Select audio format
If a digital TV channel broadcaster streams
audio in several formats, you can select an
audio format.
EN 32
1. Press .
2. Select [Setup] > [Channel settings] >
[Languages].
3. Select a setting, then press OK.

[Preferred audio format]: Receive
standard audio format (MPEG) or
advanced audio formats (AAC, EAC-3
or AC-3 if available).

[Mono/Stereo]: If stereo broadcasting is
available, select mono or stereo audio.
Reset picture and sound
You can restore the default picture and
sound settings, while the channel installation
settings remain the same.
1. While you watch TV, press
2. Select [Setup] > [TV settings] > [Factory
settings], then press OK.
All TV settings (except for channel settings)
are reset to the default factory settings.

Channel settings

Update channel list
When the TV was switched on for the first
time, a full installation of channels was
performed.
By default, when there are changes to these
channel lists, the TV updates them
automatically. You can also switch off the
automatic update, or manually update the
channels.
Note: If you are prompted to enter a code,
enter '8888'.
Automatic update
To add or remove digital channels
automatically, leave the TV in standby mode.
The TV updates channels and stores new
channels everyday. Empty channels are
removed from the channel list.
.