Contents 1 Important Safety Instructions 2 Your in-car entertainment system What's in the box Compatible iPod/iPhone 3 Get started Mount screens to the headrests Mount screens to the headrests Connect the car outlet adaptor Connect your iPhone/iPad/iPod Use the cup holder stand Manage the docking cable in your car 4 Play Adjust volume...
Important Safety Instructions • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Know these safety symbols This 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The 'exclamation point' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
Cup holder stand • iPhone/iPad/iPod video and charging cable • Cable tie • Headphone splitter • Carrying bag • Car outlet adapter • User manual Note • The images serve as reference only. Philips reserves the right to change color/design without notice.
Get started Always follow the instructions to install your twin dock player in your car. Mount screens to the headrests Position the screen on the back of the headrest and pull the mounting strap around the headrest. Attach the mounting strap to secure the screen to the headrest. Fellow the steps above to mount the other screen to the headrest.
Connect the car outlet adaptor Connect the car outlet adaptor to the car outlet. Connect the power plug to the iPhone/iPad/iPod cable. Connect your iPhone/iPad/iPod Connect your iPhone/iPad/iPod to the docking connector on the iPhone/iPad/iPod cable.
Put your iPhone into the cup holder stand with the iPhone/iPad/iPod cable attached and routed through the grooves on the back of the stand. Note • The cup holder supports only the iPhone 4 without a protective case. Manage the docking cable in your car Route the cables around the bars under the headrests of the backseats.
Adjust volume Spin the wheel clockwise or counter-clockwise to adjust the volume of built-in speakers. Use the headphone splitter Use the headphone splitter to connect two sets of headphones, allowing you and your friend to enjoy movies or music together without disturbing others. Note • The headphones in the picture are not supplied.
Standby Power Consumption <1 W Max. load for iPod/iPhone/iPad 5 V 2.1 A Dimensions of PV9002i Main Unit (W x H x D) 266 x 152 x 19.3 mm Dimensions of PV7002i Main Unit (W x H x D) 217.3 x 124.3 x 18.5 mm Weight of PV9002i Main Unit 0.435 kg With Packing 1.433 kg...
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/support). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. “Made for iPod, ” “Made for iPhone, ” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.