Setting The Easylink Control; One Touch Control - Philips DVP5996K User Manual

Setting the EasyLink control

This feature enables HDMI CEC
compliant devices to control each other
with a single remote control. It is only
available if you have connected this unit
to HDMI CEC compliant TV or device
with HDMI cable.
Turn on the HDMI CEC operations on
A
your TV and other connected devices.
(Refer to your TV or connected devices
manual for details.)
Press SETUP on the remote control.
B
Press  repeatedly to select { Video
C
Setup Page }.
Use  keys to select { HDMI Setup }
D
> { EasyLink } and press  to access.
EasyLink
Auto Wake Up TV
System Standby
The functions are turned on by default in
l
the factory.
– To disable { Auto Wake Up TV }
feature, select { Off }.
– To disable { System Standby }
feature, select { Decline }.
To exit, press SETUP.
E
dvp5996K_93_eng.indd 21
Getting Started

One touch control

Notes:
– To enable one touch play function, a
video disc must be placed in the disc
compartment before operation.
– Philips does not guarantee 100%
interoperability with all HDMI CEC
compliant devices.
One touch play
Press 2.
l
It turns on this unit and start disc play.

Your TV automatically turns on and

switches to the correct video channel.
One touch input switching
While this unit and TV are turned on;
Select a TV channel to watch TV
l
programme or start play on other
connected device.
This unit automatically switches to the

corresponding audio input and output the
sound from its speakers system.
One touch power off
Press STANDBY/POWER button to turn
l
off this unit and all the HDMI CEC
compliant devices.
When using this unit's remote control,

you have to press and hold 2.
(continued)
1
2008-03-12 8:41:03 AM