Table of Contents
Advertisement
Setting the EasyLink control
This feature enables HDMI CEC
compliant devices to control each other
with a single remote control. It is only
available if you have connected this unit
to HDMI CEC compliant TV or device
with HDMI cable.
A
Turn on the HDMI CEC operations on
your TV and other connected devices.
(Refer to your TV or connected devices
manual for details.)
B
Press SETUP on the remote control.
C
Press
repeatedly to select { Video
Setup Page }.
D
Use
keys to select { HDMI Setup }
> { EasyLink } and press
EasyLink
Auto Wake Up TV
System Standby
The functions are turned on by default in
the factory.
– To disable { Auto Wake Up TV }
feature, select { Off }.
– To disable { System Standby }
feature, select { Decline }.
E
To exit, press SETUP.
Getting Started
Notes:
– To enable one touch play function, a
video disc must be placed in the disc
compartment before operation.
– Philips does not guarantee 100%
interoperability with all HDMI CEC
compliant devices.
One touch play
Press 2.
switches to the correct video channel.
One touch input switching
While this unit and TV are turned on;
Select a TV channel to watch TV
to access.
programme or start play on other
connected device.
corresponding audio input and output the
sound from its speakers system.
One touch power off
Press STANDBY/POWER button to turn
off this unit and all the HDMI CEC
compliant devices.
you have to press and hold 2.
One touch control
It turns on this unit and start disc play.
Your TV automatically turns on and
This unit automatically switches to the
When using this unit's remote control,
(continued)
21
Advertisement
Table of Contents
