Connecting Headphones; Setting The Trusurround Xt (Srs Tsxt); Adjusting The Volume Automatically; Selecting The Internal Mute - Samsung LA26R7 Owner's Instructions Manual

Connecting Headphones

Setting the TruSurround XT (SRS TSXT)

You can also set these options simply
by pressing the SRS button on remote
control.

Adjusting the Volume Automatically

Selecting the Internal Mute

You can connect a set of headphones to your set if you wish to watch a TV programme without
disturbing the other people in the room.
When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1
multichannel content over two speakers.
TruSurround delivers a compelling,virtual surround sound experience through any two-
speaker playback system, including internal television speakers. It is fully compatible with all
multichannel formats.
1. Press the MENU button to display the menu. Press the
select "Sound", then press the ENTERbutton.
2. Press the or button to select "SRS TSXT", then press the ENTER button.
3. Press the or button to select "On" or "Off". Press the ENTER button.
4. Press the EXIT button to exit.
TruSurround XT, SRS and
SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS
Labs, Inc.
Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust
the volume every time the channel is changed. This feature allows you to automatically
adjust the volume of the desired channel by lowering the sound output when the modulation
signal is high or by raising the sound output when the modulation signal is low.
1. Press the MENU button to display the menu. Press the
select "Sound", then press the ENTER button.
2. Press the or button to select "Auto Volume", then press the ENTER button.
3. Press the or button to select "On" or "Off". Press the ENTER button.
4. Press the EXIT button to exit.
If you want to hear the sound through separate speakers, cancel the internal amplifier.
1. Press the MENU button to display the menu. Press the
select "Sound", then press the ENTER button.
2. Press the or button to select "Internal Mute", then press the ENTER button.
3. Press the or button to select "On" or "Off". Press the ENTER button.
4. Press the EXIT button to exit.
When "Internal Mute" is set to "On' , the Sound menus except for
"Sound Select" (in PIP mode) cannot be adjusted.
English-16
or button to
symbol are trademarks of
or button to
or button to