Panasonic PT-50LC13K Operating Instructions Manual page 31

TV status display
Press the RECALL button,
except when the MENU
screen is dis played, to display
current TV status information.
Using the number keys
When selecting CABLE channels 100 to 125 with the number keys, fi rst press the 1 key,
and then enter the remaining two digits.
Example 1: To select channel 125, fi rst press the 1 key, then 2, then 5.
Example 2: To select channel 12, press the 1 key, then 2. Channel 12 appears momentarily.
Example 3: To select channel 8, press the 8 key. Channel 8 appears momentarily.
Using projection display Channel up/down buttons to select input mode
Auto shut off
To extend lamp life, if there is no signal to the set's tuner for 5 minutes, the lamp will shut off automatically.
Invalid operation notifi cation
If an invalid operation is attempted, the mark shown right is
displayed.
Aspect types
(P. 32)
Receivable
broad cast types
(P. 37)
Projection display Channel up/down
buttons can also be used to select an
out side input as shown right.
* No input mode is displayed for terminals with
no equipment con nect ed.
Projection display operation
N O R M L A
S E T E R O
S P A
M O N O
CABLE
or
125
CH 01
CH 125
VIDEO 1 *
VIDEO 2 *
VIDEO 3 *
COMPONENT 1 *
Example: Invalid operation was tried
during FREEZE mode.
Channel
C H 1
A B C
Channel
caption
(P. 57)
TV
69
DIGITAL IN
RGB 2
RGB 1
COMPONENT 4 *
COMPONENT 3 *
COMPONENT 2 *
REEZE
31