Table of Contents
Advertisement
TS600FX.book Page 24 Wednesday, April 5, 2006 10:27 AM
Using the Caller List
If the Direct Dial button selected is
occupied, the display on the right will
be shown.
To overwrite, press [OK] (Yes key).
To select another empty Direct Dial
memory, press [
empty Direct Dial button by pressing
[M1], [M2] or [M3] (Save key).
• A long beep sounds.
• After a few seconds, the display will return
to the Caller List. You can continue storing
other items. To exit the Caller List, press
[EXIT] or wait for 60 seconds.
• To erase other stored items from the Direct Dial memory, see page 33.
• To cancel during programming, press [EXIT]. Start again from step 1.
• You cannot store Caller List information in the Direct Dial memory if a phone
number is not displayed.
24
3
] (No key), press an
M1 is occupied
Overwrite ?
[
] =No
[OK]=Yes
3
Advertisement
Table of Contents
