Crystal Acoustics TX-8SUB Owner's Manual page 6

2. LCR speaker (pc)
LCR speaker for use as a center, front or surround speaker on any system
3. Bipolar Towers BPΤ-3Τ 2.0 (pair of tower speakers)
•
Bipolar Tower Speakers BPT with 2 x 3" woofers and 1 x 1" tweeter for use as front
or surround speakers.
4. Bipolar System 5.0 BPT
•
4 Bipolar Tower Speakers BPT with 2 x 3" woofers and 1 x 1" tweeter for use as
front or surround speakers
•
1 LCR center
5. Bipolar System 5.1 BPS & TX-8SUB / TX-10SUB
•
5 Bipolar speakers BPS for use as the centre, front and surround speakers
•
1 subwoofer TX-8SUB / TX-10SUB
The overall presentation is engagingly vivid with your TX-8SUB / TX-10SUB subwoofer
supporting flat anechoic response from 40Hz to 200Hz. It also features accurate room
response from 29Hz to 300Hz. With these specifications, your new speakers reproduce
sound beautifully and deliver powerful action films with the authority of larger and more
expensive speakers.
Your new speakers feature:
•
Electronic protection for tweeters and woofers
•
Magnetic shielding
•
Wide horizontal dispersion that permits full, flat frequency response throughout a room
•
Controlled vertical dispersion diminishes ceiling and floor reflections for superior
focus and imaging.
•
High sensitivity for low power amplifiers and A/V receivers
•
TX-8SUB / TX-10SUB 8-inch or 10inch long-throw woofer
•
TX-8SUB / TX-10SUB flat frequency response from 30Hz or 40Hz to 200Hz
•
TX-8SUB / TX-10SUB line level (RCA) input (AUDIO IN)
•
TX-8SUB / TX-10SUB variable volume control
•
TX-8SUB / TX-10SUB selectable phase control (0
•
TX-8SUB / TX-10SUB signal sensing auto turn ON/OFF
6
or 180 )
ο ο