The System Plays At Low Volumes But Shuts Off As Volume Increases; There Is No Sound From The Surround Speakers - Crystal Acoustics TX-8SUB Owner's Manual

6.3

The system plays at low volumes but shuts off as volume increases

> Check all wires and connections between receiver/amplifier and speakers
> Make sure all wires are connected properly
> Make sure none of the speaker wires are frayed, cut or punctured, or touching each other.
> If more than one pair of main speakers is being used, check the minimum impedance
requirements of your receiver/amplifier

6.4 There is no sound from the surround speakers

> Check all wires and connections between receiver/amplifier and speakers
> Make sure all wires are connected properly
> Make sure none of the speaker wires are frayed, cut or punctured, or touching each other/
> Review proper operation of your receiver/amplifier and its surround sound features
> Make sure the movie or TV show you are watching is recorded in a surround sound
mode. If it is not, check to see whether your receiver/amplifier has other surround
modes you may use
> In Dolby
Digital or DTS
®
so that the surround speakers are enabled. When five satellites are in use, remember
to configure your receiver or processor for 6.1-channel operation, and when six
satellites are in use, configure your receiver or processor for 7.1-channel operation
> Review the operation of your DVD player and the jacket of your DVD to make sure that
the DVD features the desired Dolby
properly selected that mode using both the DVD player's menu and the DVD disc's
menu
modes, make sure your receiver/amplifier is configured
®
Digital or DTS
®
modes, and that you have
®
17