Crystal Acoustics Teevy Bar Quick Manual

Thank you for purchasing Crystal Acoustics Teevy Bar
4EEVY ‘AR IS THE ANSWER TO TODAYiS TVs demand for great sound OFFERING Deep and powerful bass WITH incredible dispersion, to bring your TV to life.
)N ADDITION YOU CAN connect numerous devices AND enjoy countless hours of non compromised listening.
3MALL YET POWERFUL IT PRODUCES AN unexpectedly deep and clear bass.
Acoustic Features:
l 7 Drivers WITH Balanced Directivity FOR WIDE SOUND everywhere in the room
l Ideal In-Room response using WiSound technology
l Incredible Bass DOWN TO 48Hz
Place it
1
4EEVY "AR IS DESIGNED TO BE PLACED in front of your TV. You can alter-
natively mount it on the wall, or place it on a shelf UNDER YOUR 46
rack, taking care not to cover the unit's side speakers.
Note: Before use, place the included self adhesive feet on the
bottom corners of the speaker
To mount your Teevy Bar on the wall YOUiLL NEED TO drill two holes:
1. -ARK WITH A PEN OR PENCIL THE POINTS WHERE YOUiLL DRILL THE HOLES The
distance between the two holes is 750mm.
2. Drill the holes on the wall USING A DRILL
3. Place the plugs in the holes on the wall AND ENTER THEM fully (you
MAY NEED A HAMMER 
4. 3CREW THE MOUNTING hooks in the plugs.
5. Hang your Teevy Bar on the wall WITH THE high/mid drivers looking
up and sideways. After placing it, pull gently on each side, to make
SURE THAT THE TWO SUPPORT POINTS ARE SECURED
TeevyBar Quick Guide
WiSound Speaker Conventional Speaker
$RIVERS FIRING FORWARD SIDEWAYS AND UPWARDS &RONT FIRING SPEAKERS ONLY
Connect it
2
Connect Teevy Bar TO YOUR DEVICES THROUGH
1. Optical: If available, use this connection for best quality
2. RCA: Connect both left and right CHANNELS TO YOUR DEVICE
3. AUX 3.5mm: Connect to the headphone OUTPUT OF YOUR DEVICE
4. USB: Play songs from your USB HDD/Flash or charge your phone/tablet
5. Ethernet: Get network access IN CASE OF NOWEAK 7I &I SIGNAL
Note: 7HEN THE 3.5mm socket IS USED IT TAKES priority over the RCA INPUT AND IT BECOMES THE Auxiliary Source. In this case the RCA input is muted.
Note: To save power 4EEVY "AR WILL automatically turn off IN OPTICAL  LINE IN MODE IF no sound HAS PLAYED THROUGH IT FOR 30 minutes )T WILL AUTOMATICALLY turn on again once it receives a signal.
Control it
3
Power ON/OFF
Control Teevy Bar BY THE INCLUDED
remote control.
Play/Pause
Previous Track
Web Radio Presets
Learning Function
Select it
4
Use the šPRWV DWVVQP on the unit or on the remote control,
to cycle BETWEEN THE VARIOUS AVAILABLE OPTIONS
0AIR IT ;‘LUETOOTH=
5
9OU CAN CONNECT YOUR 4EEVY "AR WITH ANY Bluetooth enabled device (phone,tablet, computer, etc).
1. Select the Bluetooth input on the remote by 2. To pair A "LUETOOTH DEVICE TO 4EEVY "AR press
and hold the pairing button for about 5sec.
cycling Inputs.
4HE "LUETOOTH INDICATOR ,%$ WILL start blinking.
/NCE PAIRED music FROM YOUR DEVICE will play through the unit.
To add another "LUETOOTH DEVICE repeat from step 2. Teevy Bar may store up to eight PAIRED DEVICES IN MEMORY
Mute
Volume Up
Next Track
Volume Down
Bluetooth Pairing
Input Selector
Note: If in maximum volume you are experiencing
crackling sound DURING HEAVY Bass passages,
the protection mechanism FOR THE AMPLIFIER AND SPEAKER
DRIVERS HAS BEEN ACTIVATED Turn down the volume a bit!
Input colors ARE ACCORDING TO TABLE
Color Input
Blue Bluetooth
White Optical
Green Aux
Yellow 7I &I
3. #ONSULT THE INSTRUCTIONS OF THE DEVICE to be
paired to connect to Teevy Bar. Successful pair-
ING WILL BE SIGNALED BY A 'beep' FROM THE UNIT AND
the Bluetooth indicator ,%$ WILL stop blinking.