Table of Contents
Advertisement
AUTO FEATURES
-
AUTO
ANSWER
This feature only works when the phone is connected to a headset. The phone then automatically
answers the call after about 5 seconds (no key to be pressed).
1
Press OK. Select Settings.
2
Select
Phone
settings.
3
Select
Auto
features.
4
Select
Auto-answer
5
Select
Save
to store your setting.
-
AUTO
RETRY
This feature allows the phone to automatically redial the number after the call failed due to an engaged
line or an unavailable signal from the network. The number is re-dialled 10 times maximum until it goes
through.
1
Press OK. Select Settings.
2
Select
Phone
settings.
3
Select
Auto
features.
4
Select
Auto-retry
5
Select
Save
to store your setting.
When activated, Retrying and a countdown timer are displayed before each new trial. An auto-retry
warning tone sounds each time a new call attempt is made.
Selecting Exit or pressing any key during the retrial process cancels the auto-retry process.
-
-
/
AUTO
SWITCH
ON
OFF
This feature allows the phone to automatically switch on or off at a pre-determined time.
1
Press OK. Select Settings.
2
Select
Phone
settings.
3
Select
Auto
features.
4
Select
Auto-switch-on
5
Enter the time you want your mobile to switch on and/or to switch off and press OK.
6
Select
Save
to store your setting.
If the phone is already on at automatic switch-on time it remains on.
When the phone is about to automatically switch off a warning message and a countdown timer
are displayed. Selecting Exit cancels the switch off process.
If the mobile is already off at switch-off it remains off.
If a call is in progress at switch-off time, the switch-off process is postponed until the call is ended.
Caution - Remember to turn off the Auto switch-on feature when boarding an aircraft.
See "general safety", page 14.
ACTIVE FLIP
This feature allows to automatically answer/end a call when opening/closing the mobile.
1
Press OK. Select Settings.
2
Select
Phone
settings.
3
Select
Auto
features.
4
Select
Active flip
TIME AND DATE
This feature allows to set the mobile time according to the world time zone map, based on
Greenwich Mean Time (Origin clock). A Secondary clock is also available.
This feature is useful for the Diary. To import or export calendar cards, events and tasks, timetables
have to be set according to Time zones.
Both clocks are displayed on the same screen. The date and time and the city name are displayed
for both clocks.
and choose On.
and choose On.
or
Auto-switch-off
and select
on
to activate the feature.
72-
and select
On
to activate the feature.
Settings
Advertisement
Chapters
Table of Contents
