Mitsubishi M750 User Manual page 35

COPY TO
Please see the 'To' section above.
NAME CARD
The name card field allows to attach a copy of a vcard to the multimedia message.
1 Select the Name card
2 Select a name in the phonebook. A copy of the vcard is then attached to the message
1.If there is already an attached vcard, pressing OK displays the Modify and Delete options.
2. The selected cad is automatically re-named if it contains Chinese characters.
PREPARING THE PHONE TO SEND MMS MESSAGES
The Multimedia Message service is subscription and network dependent. The operator profile
details may already be stored on your mobile. If not, please contact your service provider to get
them.
The profile list can contain up to 3 MMS profiles. A profile is a list of parameters that allow MMS
connections via a specific gateway.
TO ENTER AND STORE THE PROFILE DETAILS
You can only register profile details if you have previously registered profiles in the Connection
Manager menu (see "connection manager", page 73):
1
Press OK. Select Messages.
2 Select Multimedia
3 Select Settings.
4 Select MMS profiles.
5 Choose an empty profile ([...]) and press OK.
6 Enter the profile name and press OK.
7 Select Message
the http:// and https:// root address, or type in the URL address. Press OK.
8 Select Connection
GPRS connection fields are linked to the connection manager and thus allow to pick one
from the displayed list - see "Connection Manager", page 73). Select
9 Select Gateway settings
The sending and receiving of MMS is now possible.
10 Select Advanced settings
1.All the requested parameters are obtainable from your network operator and/or Wap™ provider.
2. The phone number or access point name, the login and the password are to be stored in the Connection
Manager (see Table , page 73).
3. Access to the content of the MMS profile may depend on the pre-programmation of the settings. The connection
settings menu may not be available in some cases. These settings may be 'Locked' (operator dependent) and not
be user programmable.
4. Your service provider may require to have the security context reset. Select Yes.
5. For more information on the Advanced settings please refer to " advanced settings on wap™ profiles ", page 67.
6. The Validity period for an MMS is the maximum time the message is available on the network before it can
be retrieved by the addressee. The validity period is set to Maximum by default. This fearture is present in the
Advanced settings (page 67).
SETTING MULTIMEDIA MESSAGES CHARACTERISTICS
Before sending a message you can determine whether or not you want to receive a delivery
report, a read reply report (to confirm your message and its contents were read by the address-
ee) and to set a priority degree (high, normal or low) to your message.
1
Press OK. Select Messages.
2 Select Multimedia
3 Select Settings.
4 Select Message config.
5 Enter the required information and select
The availability of this menu and of its contents is operator dependent.
list
messages.
centre. Select List to select one of the available home page addresses or
profiles. Enter the requested information (the GSM connection and
and type in the IP address.
and fill in the required fields.
messages.
35-
Save to store your settings.
Multimedia Messages
Save to store the data.