Table of Contents
Advertisement
The call type and the accumulated times of outgoing and incoming calls are
displayed.
Selecting Details displays information on calls made on your home network, on
National roaming and on International roaming.
If Line 2 is active too 'All Calls' for Line 1 and Line 2 are displayed separately.
BALANCE INFORMATION
This service may be supplied by your service provider. It allows to get the remaining airtime
balance on your phone line.
Please contact your service provider for more information. If your subscription allows access to
this information:
1
Press OK. Select
2
Select
Call
timers.
3
Select
Balance
4
Select
Call
or
Set
When selecting Call
if the balance information number is already stored, a call is sent to the balance
,
information centre. If no number is stored a screen with a number composer is displayed, enter the
required number and press OK. Your can also select Set number and type it in. Press OK to store
the number, then select Call to call the information centre number.
-
REMINDER
CALL DURATION
You can set a duration reminder to regularly beep to remind you of the time spent on your call.
The occurrence can be any multiple of 1 minute (up to 59 minutes).
1
Press OK. Select
2
Select
Call
timers.
3
Select Reminder.
4
Select
On
to activate the Call timer.
5
Type the call timer interval (e.g.: 2 = a beep is played every 2 minutes while in conversation).
6
Press
OK
to validate the entry.
-
CALL TIMER
RESET
This feature allows to reset the call timers. The 4 digit lock code is needed to reset the call timers
(default lock code: '0000').
1
Press OK. Select
2
Select
Call
timers.
3
Select Reset.
4
Select Yes.
5
Enter the phone lock code and press OK.
-
CALL COSTS
MANAGEMENT
Some service providers offer an Advice of Charge (AoC) subscription service allowing to get
the last call cost, the total calls cost and the remaining balance on your account (after you have
set a 'credit limit' ).
To display these you first have to set a currency value and to enter an average cost per unit
(only calls units are displayed if the cost information is not stored).
To set a currency value per unit:
1
Press OK. Select
2
Select
Call
costs.
3
Select
Display cost
4
Select Currency. The current currency unit value is displayed.
5
Select Modify. Enter your PIN 2 code and press OK.
6
Enter the currency name (up to 3 letters). Press
7
Enter the unit cost (e.g.: 0.15 Euro per minute). And press
(
SUBSCRIPTION DEPENDENT
Calls &
Times.
information.
number.
Calls &
Times.
Calls &
Times.
Calls &
Times.
type.
)
OK
to validate.
OK
Calls & Times
42-
to validate.
Advertisement
Chapters
Table of Contents
