8. Help
8.5.2 When the recording paper
is not fed into the unit properly
The display will show the following.
1
Pull the tension plate forward (1), then
remove the paper tray cover (2). Remove
the recording paper (3).
2
2
Re-insert the recording paper. Attach the
paper tray cover, then push back the tension
plate (see steps 5 to 6 on page 15).
L Before re-inserting, make sure to fan and
straighten the recording paper.
8.6 Document jams -
sending
1
Lift open the front cover (1), holding OPEN
(2).
1
2
Caution:
The fuser unit (3) gets hot. Do not
touch it.
60
FAILED PICK UP
3
1
3
2
Hold the centre part of the front cover (1),
and pull open the inner cover (2).
1
L Do not touch the transfer roller (3).
3
Remove the jammed document carefully
(1).
4
Push back the inner cover.
5
Close the front cover (1) by pushing down
on both sides, until locked.
1
2
3
1