Caller Id Service; Using Caller Id Service; Caller List; Missed Calls - Panasonic KX-TG8161E Operating Instructions Manual

Caller ID Service

Using Caller ID service

Important:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details.
Caller ID features
When an outside call is being received, the
caller's phone number is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– "Out of Area": The caller dials from
an area which does not provide a Caller
ID service.
– "Private Caller": The caller
requests not to send caller information.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.

Missed calls

If a call is not answered, the unit treats it as a
missed call and is displayed. This lets you
know if you should view the caller list to see
who called while you were away.
Even if only one missed call in the caller list is
viewed (page 36), disappears from the
display. When you receive another new call,
is displayed again.
Note:
R Even when there are unviewed missed
calls, disappears from the standby
display if the following operation is
performed by one of the registered
handsets:
– Being replaced on the base unit or
charger.
– Pressing M N.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
36
TG8151_61E(en)_1220_ver021.pdf
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
36
phonebook, the stored name in the
phonebook is displayed and logged in the

caller list.

Category ringer tone
This feature can help you identify who is
calling by using different ringer tones for
different categories of callers. When adding an
entry to the phonebook, you can assign it to
the desired category (page 22). When a call is
received from a caller assigned to a category,
the ringer you selected for that category rings
after caller information is displayed.
If you select "Default Ringer", the unit
uses the ringer tone you selected on page 28
when calls from this category are received.
The default setting is "Default Ringer".
1
(left soft key) a
2
MbN: "Category" a
3
MbN: Select the desired category. a
4
MbN: Select the current setting of the
category ringer tone. a
5
MbN: Select the desired ringer tone. a
6
M N
Caller list
Important:
R Only 1 person can access the caller list at a
time.
R Make sure the unit's date and time setting
is correct (page 16).
Viewing the caller list and calling
back
1
MFN ( )
2
Press MCN to search from the most recent
call, or press MDN to search from the
oldest call.
R You can see the detailed information
about the caller by pressing
when in multiple display mode.
2011/12/20 18:50:48