Basic Controls - Panasonic TH-42PHD5 Operating Instructions Manual

Basic Controls

Explanations from here onward describe the functions when the optional BNC Terminal Board is installed.
Main Power On/Off Switch
Power Indicator
The Power Indicator will light.
•
Power-OFF .. Indicator not illuminated
(The unit will still consume some power as
long as the power cord is still inserted into
the wall outlet.)
•
Stand-by ...... Red
•
Power-ON ........ Green
Stand-by (ON/OFF) button
The Plasma Display must first be plugged into the
wall outlet and turnded on at the power switch.
(see page 14)
Press this button to turn the Plasma Display On,
from Standby mode. Press it again to turn the
Plasma Display Off to Standby mode.
Status button
Press the "Status" Button to display
the current system status.
AV
4 : 3
Off timer 90
1 AV(S Video), Component/RGB,
PC mode
2 Aspect mode (see page 18)
3 Off timer
The off timer indicator is displayed
only when the off timer has been set.
(see page 21, 22, 24, 25)
PICTURE button
(see page 24)
PICTURE POS./SIZE button
(see page 20)
PC button
Press the "PC" mode selection
button to select the PC mode.
This button is used to switch
directly to PC mode.
R - STANDBY
G POWER ON
TH-50PHD5
(AV(S Video), Component/RGB and
PC Mode Selection)
Press the "INPUT" button to select AV
(S Video), Component/RGB and PC
input signal modes sequentially.
(see page 15)
1
2
3
N
N button
PICTURE
PICTURE
POS. /SIZE
PC
The Plasma Display can be preset to switch to stand-by after a fixed period.
The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes
(off timer cancelled) each time the button is pressed.
When three minutes remain, "Off timer 3" will flash.
The off timer is cancelled if a power interruption occurs.
—
INPUT
INPUT button
SURROUND button
(see page 23)
INPUT
SURROUND
VOL
R
SOUND SET UP
ASPECT
OFF TIMER
OFF TIMER button
+
VOL
Volume Adjustment
Press the Volume Up "+"
or Down "–" button to
increase or decrease the
sound volume level.
INPUT button
AV(S Video), Component/RGB
and PC Mode Selection)
Press to select AV(S Video),
Component/RGB and PC input
signal modes sequentially.
(see page 15)
Sound mute On/Off (see page 22)
Volume Adjustment
Press the Volume Up "+" or Down
"–" Button to increase or decrease
the sound volume level.
R button (see page 17)
ACTION button
Press to make selections
POSITION buttons
SET UP button (see page 16)
SOUND button (see page 22)
ASPECT button
Press to adjust the aspect.
(see page 18)
30 60
0
90
13