Making/Answering Calls; Making Calls - Panasonic KX-TG9321 Operating Instructions Manual

TG9321(e).book Page 15 Friday, May 28, 2010 4:34 PM

Making calls

1
Lift the handset and dial the phone
number.
L To correct a digit, press {CLEAR}.
2
{C}
L An available line is automatically
selected and the line number is
displayed. To change the line
selection mode, see page 14.
L You can also select the line
manually by pressing {LINE 1} or
{LINE 2}.
3
When you finish talking, press
{OFF} or place the handset on the
base unit or charger.
Note:
L When 2 or more handsets are
registered,
2 outside calls can be handled
simultaneously on separate telephone
lines.
Example: While line 1 is in use, you
can make or answer a call on line 2 at
the same time.
Using the speakerphone
1
During a conversation, press {s} to
turn on the speakerphone.
L Speak alternately with the other
party.
2
When you finish talking, press
{OFF}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
For assistance, please visit http://www.panasonic.com/help

Making/Answering Calls

Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1
{REDIAL}
2
{V}/{^}: Select the desired phone
number.
3
{C}
Erasing a number in the redial list
1
{REDIAL}
2
{V}/{^}: Select the desired phone
number. i {ERASE}
3
{V}/{^}: "Yes" i {SELECT}
4
{OFF}
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 21).
Example: If you need to dial the line
access number "9" when making outside
calls with a PBX:
1
{9} i {PAUSE}
2
Dial the phone number. i {C}
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Repeat as
needed to create longer pauses.
15