Panasonic NV-SV121EB Operating Instructions Manual page 31

Recording with VIDEO Plus+
Video Plus+
8 3 5 4 2 - - - -
Timer recording
Pos Date Start Stop
- - - - - - 10:30 11:30 SP - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
Invalid entry
- - - - - - - -/ - - - -: - - - -: - - - - - -
Timer recording 1 / 3
Pos Date Start Stop
1 AV2 26/10 10:30 11:30 SP ON
-- ---- -- / -- --:-- --:-- -
-- ---- -- / -- --:-- --:-- -
-- ---- -- / -- --:-- --:-- -
-- ---- -- / -- --:-- --:-- -
-- ---- -- / -- --:-- --:-- -
VIDEO Plus+ Codes for Satellite Receivers / Set Top Box
This VCR is not designed to control (switch on or change channel) your
satellite receiver or Set Top Box, however, it can be taught to recognise
VIDEO Plus+ Codes for Satellite stations. The Satellite Receiver or Set Top
Box must be switched on and the correct station selected. Some receivers
have their own timer facility for this purpose. Please refer to your Satellite
Receiver/Set Top Box instructions for use of such timer facilities.
For your VCR to recognise the VIDEO Plus+ Codes for each satellite station,
you must teach your VCR which channel or AV input to record from for the first
time. Otherwise when setting a VIDEO Plus+ recording, the [- -] symbol will
appear in the channel position indicating that the VCR does not know which
channel position to set. Once you have set the channel/AV input the VCR will
remember it whenever you use a VIDEO Plus+ Code for the station again.
VIDEO Plus+
Press the VIDEO Plus+ button.
1/3
Enter a VIDEO Plus+ Code from a Satellite TV Guide for a satellite channel,
PDC
e.g. Sky 1 using the Numeric buttons. Press
Press the ENTER button. [ - - ] will appear instead of a channel number/AV input.
Press the CH button to select the channel or AV input that is to be used for
recording from the satellite channel.
Press the ENTER button to memorise the setting. The VCR will now
automatically set the programme position or AV input correctly when a VIDEO
Plus+ recording is set for this satellite station in the future.
Press
PDC
CANCEL button to delete it from the timer recording list. It is no longer
needed.
---
---
Repeat the steps above until you have set and deleted dummy timer
---
recordings for each of the satellite stations that you will make VIDEO Plus+
---
recordings from.
---
Press EXIT when you have finished.
to select the programme that you have just set. Now press the
to correct any mistakes.
31