Troubleshooting - Panasonic TX-26LX50F Operating Instructions Manual

Troubleshooting

If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model
number and serial number (both found on the rear of the TV).
Symptoms
Picture
Snowy Picture
Multiple Images
Interference
Normal Picture
No Picture
No Colour
Poor or Distorted Picture
Normal Picture
There may be red spots,
blue spots and green
spots on the screen.
26
Sound
Noisy Sound
Normal Sound
Noisy Sound
No Sound
No Sound
Normal Sound
Weak or No Sound
Weak or Distorted Sound
Normal Sound
Aerial location, direction or connection
Aerial location, direction or connection
Electrical appliances
Cars / Motorcycles
Fluorescent lights
Switch on P-NR in Picture menu to reduce picture noise.
Volume level
Sound mute switched on.
TV set to AV mode.
Not plugged into AC outlet.
Not switched on.
Picture / Sound controls set at minimum levels.
Check if in Standby mode.
Colour controls set at minimum levels.
Retune Channel (s).
Sound reception may have deteriorated.
Switch MPX setting (Sound menu) to Off until reception improves.
This is a characteristic of liquid crystal panels and is not a problem. The
liquid crystal panel is built with very high precision technology giving you
fi ne picture details. Occasionally, a few non-active pixels may appear on
the screen as a fi xed point of blue, green, or red.
Please note this does not affect the performance of your LCD.
Checks