Creating A Network Card Connection; Starting And Ending A Network Card Connection - Mio 558 User Manual

Have a network card (CompactFlash or SD IO). (For installation
information, see the documentation supplied with the product.)
Obtain the following information from your network administrator: user
name, password and domain name.

Creating a Network Card Connection

1. Insert the network card into your Pocket PC.
2. The first time you insert the card, Network Settings appears automatically
so that you can configure the network card. If it does not appear or to change
settings later, tap
tab
Advanced Network Card
3. If you need to enter specific server information, tap the appropriate adapter
and then Properties. Most networks use DHCP, so you should not have to
change these settings unless your network administrator instructs you to do
so.
4. If necessary, connect the network card to the network by using a network
cable.
NOTE: You may need proxy server and VPN connection settings. For more information,
see your network administrator.

Starting and Ending a Network Card Connection

To start the connection, install the network card and connect the network cable.
Then, use the desired program. For example, switch to Pocket Internet Explorer
and browse to a Web page. Your Pocket PC will automatically connect.
To end the connection, remove the card from your Pocket PC.
Settings Connections
.
tab
Connections
89