Mio 558 User Manual page 102

Creating a Bond
1. Make sure that the two devices are within 10 meters (30 feet) of one another
and that Bluetooth is in discoverable mode on both devices. (See "Selecting
a Bluetooth Mode" earlier.)
2. Tap Settings
New.
3.
Your Pocket PC searches for other Bluetooth devices and displays them in the list.
4.
Tap the name of the other device and then Next.
5. In PIN , enter a PIN of between 1 and 16 characters and tap
6. Enter the same PIN on the other device.
7. If you want, in
Name
name.
8. Tap .
Finish
Accepting a Bond
1. Make sure that the two devices are within 10 meters (30 feet) of one another
and that Bluetooth is in discoverable mode on both devices. (See "Selecting
a Bluetooth Mode" earlier.)
2. When prompted to bond with the other device, tap
3. In , enter a PIN of between 1 and 16 characters and tap
PIN
enter the same PIN that was entered on the device requested the bond.
4. If you want, in
Name
name.
5. Tap . The bond is created. You can now exchange information with
Finish
the other device.
NOTE: To delete a bond, tap
Bonded Devices tab. Tap and hold the bond to delete. Tap Delete.
92
Connections tab Bluetooth
, edit the name of the other device. You may use any
, edit the name of the other device. You may use any
Settings
Bonded Devices
Next .
Yes .
. You must
Next
Connections tab
Bluetooth
tab