Other Play Methods - Panasonic SL-SX430 Operating Instructions Manual

Other Play Methods

Program Play
Press [:,9] while stopped to
1
select the tracks.
You can skip albums when programming
MP3 tracks ( ➪ below).
2
Press [MEMO] to register.
Track number 3
01
Sequence number
M
3
Repeat steps 1 and 2 to
register up to 20 tracks.
4
Press [1/;] to start play.
Changing the sound quality
Each time you press
Boosts the
bass
No display (canceled)
≥The effect may differ between different kinds of music.
Playing MP3
Starting play from an album (Album skip)
Press and hold until the album you want appears.
ALBUM
3
Album number
TRACK
10
Number of tracks
Playing only the tracks in a selected album (Album mode)
Each time you press and hold
Main unit
ALBUM
Album mode
≥You can select another album with album skip.
≥You cannot turn album mode on during program play.
Enjoying even more natural sound (Digital Re-master)
You can regenerate signal frequency lost during compression, restoring
to near pre-compression form.
While stopped, each time you press and hold
Main unit
Sound enhanced
When Playing MP3
01
Sequence number
M
ALBUM
3
Album number
TRACK
1
Track number
M
∫To confirm the contents of
the program
Press [MEMO] while the disc is
∫
playing.
∫To cancel program play
Press [∫].
∫
Main unit
Enhanced Concert hall-
S-XBS like sound
Main unit
No display
(canceled)
No display
Battery life conservation
Play modes
Each time you press
Main unit
RANDOM
One track
All track
Random
repeat
repeat
No display (canceled)
∫Specifying the AB segment
Press [MEMO] at the start point (A) and once more at the end point (B).
≥ Stop or skip ( ➪ page 5) to cancel.
≥ If you do not specify point B and reach the end of disc, point B is set automatically and
repeat begins. You can also specify point B again by pressing [MEMO].
You cannot select "RANDOM"and "A ` B" while playing MP3.
≥
Anti-Skip System
This system reduces the skipping caused by vibration to a minimum.
You can change the anti-skip memory time for CD-DA to improve sound quality.
While stopped, each time you press and hold
Main unit
Sound enhanced mode,
10-second anti-skip memory
You cannot change the memory time for MP3. It is a maximum of 100
≥
seconds for data recorded at 128 kbps.
Turning the operation tone off
Press and hold [EQ] until "bP oFF" appears.
MP3
This unit can play MP3, a method of compressing audio without overtly
hurting audio quality.
∫When creating MP3 files to play on this unit
Disc formats: ISO9660 level 1 and level 2 (except for extended formats)
CD-ROM drive
001album
1
001track. mp3
002track. mp3
003track. MP3
002album
2
004track.mp3
005track.mp3
004album
3
008track.MP3
009track.MP3
003album
4
006track.mp3
007track.MP3
∫Limitations on MP3
≥This unit is compatible with multi-session but if there are a lot of
sessions it takes more time for play to start. Keep the number of
sessions to a minimum to avoid this.
≥This unit cannot play files recorded using packet write.
≥If a CD-ROM format CD contains MP3 and files other than MP3, only
the MP3 files will be playable.
≥Depending on how you create MP3 files, they may not play in the order
you numbered them or may not play at all.
6
RANDOM
Random repeat AB repeat (AB specified
segment repeat) ( ➪ below)
Anti-skip enhanced mode,
45-second anti-skip memory
bP oFF
Tone off
Naming tracks and albums
Prefix with 3-digit numbers in the order you want to play
Extension
001track.mp3
( or.MP3 )
Up to 30 characters
If you created an album such as
004album on the left, the files may not
play in name order.
The albums would play in the order 1,
2, 3, 4.
During play
or
While paused
A B
bP on
Tone on
RQT7184