Table of Contents
Advertisement
3. Preparation
3
Press {A} or {B} repeatedly to display the
desired setting.
– "TONE" (default): For tone dial service.
– "PULSE": For rotary pulse dial service.
4
Press {SET}.
L The next feature will be displayed.
5
Press {MENU}.
3.8 Date and time
The date and time can be set using either the
cordless handset or the base unit.
L The other party's fax machine will print the
date and time on each page you send
according to your unit's date and time setting.
L The accuracy of the clock is approximately
±60 seconds a month.
L The date and time may be lost after a power
failure. In this case, set the date and time
again.
3.8.1 With the cordless handset
{j/OK}
{<}{>}
Important:
L Confirm that the power cord of the base
unit is connected.
L Ensure that w is not flashing.
1
Press {j/OK}.
2
Select "Handset Setup", then press {>}.
3
Select "Time Settings", then press {>}.
4
Select "Set Date & Time", then press
{>}.
L The cursor (|) will appear on the display.
5
Enter the current date/month/year by
selecting 2 digits for each.
20
6
7
8
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
3.8.2 With the base unit
{ih}
1
2
3
4
Example: 10 August, 2005
Press {1}{0} {0}{8} {0}{5}.
Enter the current hour/minute by selecting 2
digits for each. Press {*} repeatedly to
select "AM", "PM", or 24-hour time entry.
L When neither "AM" nor "PM" are
displayed, 24-hour time entry is selected.
Example: 15:20 (24-hour time entry)
Press {1}{5} {2}{0}.
Press {j/OK}.
Press {ih}.
{<}{>}
Press {MENU}.
SYSTEM SETUP
Press {<} or {>} repeatedly to display the
following.
SET DATE & TIME
Press {SET}.
L The cursor (|) will appear on the display.
D:|
TIME: 00:00
Enter the current date/month/year by
selecting 2 digits for each.
Date :10-08-05
Time :00:00
@=12/24
Date :10-08-05
Time :15:20
@=12/24
{MENU}
{SET}
PRESS [( )]
PRESS SET
0 1/M:01/Y:05
Advertisement
Table of Contents
