Frequently Asked Questions - Panasonic KX-TG9471 Quick Manual

TG9471_QG(e).fm Page 6 Wednesday, June 22, 2011 2:26 PM

Frequently asked questions

Question
Why is w flashing?
How can I increase the
handset volume level?
Why is the conversation
noisy or cutting off?
Can I add another
accessory handset to my
base unit?
Can I keep the batteries
charging all the time?
How can I answer a call
waiting call (2nd call)?
For further registration information, visit http://www.panasonic.com/RegisterYourHandset
Cause/solution
L The handset is too far from the base unit. Move closer.
L The base unit's AC adaptor is not properly connected. Reconnect AC adaptor
to the base unit.
L The handset is not registered to the base unit. Register it.
1
Handset: {MENU} (13)
2
Base unit: Press and hold {LOCATOR} for about 5 seconds until the
registration tone sounds.
3
Handset: Press {OK}, then wait until a long beep sounds.
L Press the navigator key {^} repeatedly while talking.
L Try to relocate the base unit so that distance to the handset is minimized.
L If the same problem occurs even if the handset is next to the base unit, call
Panasonic customer support at 1-800-211-PANA (1-800-211-7262).
L Yes, you can add up to 6 handsets (including the handset(s) sold with your own
base unit) to a single base unit.
L To purchase accessory handset (KX-TGA939), please visit
http://www.panasonic.com
or call 1-800-332-5368. TTY users (hearing or speech impaired users) can call
1-866-605-1277.
L You can leave the handset on the charger anytime. This will not harm the
batteries.
L Press {CALL WAIT} when you hear the call waiting tone.
– 6 –