Download Table of Contents Print this page

Makita 4107RH Instruction Manual

Hide thumbs Also See for 4107RH:

Advertisement

Quick Links

Cutter
MODEL 4107RH
005164
I N S T R U C T I O N
M A N U A L
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Advertisement

loading

Summary of Contents for Makita 4107RH

  • Page 1 Cutter MODEL 4107RH 005164 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2: Specifications

    SPECIFICATIONS Model 4107RH Wheel diameter 180 mm Max. cutting capacities 60 mm 5,000 No load speed (min Overall length 370 mm Net weight 7.2 kg Safety Class Class I • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS ENA001-2 WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. 14.
  • Page 4: Additional Safety Rules

    ADDITIONAL SAFETY RULES ENB052-2 This tool is equipped with a portable residual Hold the tool firmly. current device. Do not connect the tool to a Keep hands away from rotating parts. power supply without using the PRCD (Portable Make sure the wheel is not contacting the work- Residual Current Device).
  • Page 5: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Portable residual current device 005151 Connect the tool to a power supply and test the Portable Residual Current Device (PRCD) before using the tool.
  • Page 6 BE SURE TO TIGHTEN THE HEX BOLT SECURELY. CAUTION: • Use only the Makita wrench to install or remove the wheel. 1. Hex bolt 2. Diamond wheel 3. Outer flange 4. Inner flange...
  • Page 7: Operation

    The inner flange has a 25 mm diameter on one side and 25.4 mm diameter on 005171 the other. The side with 25.4 mm diameter is marked by “25.4”. Use the cor- rect side for the hole diameter of the wheel you intend to use. Mounting the wheel on the wrong side can result in dangerous vibration.
  • Page 8 To maintain product SAFETY and RELIABILITY, repairs, any other mainte- nance or adjustment should be performed by Makita Authorized Service Cent- ers, always using Makita replacement parts. 1. Brush holder cap...
  • Page 9 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 10 Memo...
  • Page 11 Memo...
  • Page 12 Makita Corporation 884270A7...