Download Table of Contents Print this page
Makita 4107RH Instruction Manual

Makita 4107RH Instruction Manual

Hide thumbs Also See for 4107RH:

Advertisement

Quick Links

INSTRUCTION MANUAL
Cutter
4107RH
005164
IMPORTANT: Read Before Using.
1

Advertisement

loading

Related Manuals for Makita 4107RH

Summary of Contents for Makita 4107RH

  • Page 1 INSTRUCTION MANUAL Cutter 4107RH 005164 IMPORTANT: Read Before Using.
  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model 4107RH Wheel diameter 180 mm Max. cutting capacities 60 mm No load speed (min 5,000 Overall length 370 mm Net weight 6.8 kg Safety class Class I • Due to our continuing program of research and development, the specifications herein are subject to change without notice.
  • Page 3 Do not expose power tools to rain or wet Power tool use and care conditions. Water entering a power tool will 18. Do not force the power tool. Use the correct increase the risk of electric shock. power tool for your application. The correct Do not abuse the cord.
  • Page 4 the least amount of wheel is exposed towards where the wheel may contact hidden wiring or the operator. The guard helps to protect operator its own cord. Wheel contacting a "live" wire may from broken wheel fragments and accidental make exposed metal parts of the power tool "live" contact with wheel.
  • Page 5: Functional Description

    Never place your hand near the rotating wheel. FUNCTIONAL DESCRIPTION Wheel may kickback over your hand. Do not position your body in line with and behind the rotating wheel. Kickback will propel CAUTION: the tool in direction opposite to the wheel's Always be sure that the tool is switched off and •...
  • Page 6 Align the notch in the front of the base with your cutting line on the workpiece. Switch action 005170 CAUTION: CAUTION: Use only the Makita wrench to install or remove • Before plugging in the tool, always check to see • the wheel. that the switch trigger actuates properly and The inner flange has a 25 mm diameter on one side and returns to the "OFF"...
  • Page 7: Operation

    Cleaning covers OPERATION 1. Clamp 2. Cover (A) 013266 005173 When accumulation of dust on the cover (A) looks Adjust the amount of water flow. Hold the tool firmly. Set excessive, loosen the clamp and remove the cover (A). the base plate on the workpiece to be cut without the Wash off accumulation of dust inside the cover (A) and wheel making any contact.
  • Page 8: Optional Accessories

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Diamond wheels • Socket wrench • Offset wrench •...
  • Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884270C7...