Panasonic TH-37PV500B Operating Instructions Manual page 51

Teletext operation
MENU
Blue
INDEX
TEXT
MULTIWINDOW
In DVB mode
OK
1 2 3
4 5 6
7 8 9
0
VCR
TEXT
Alternatively, if you know which sub page you require, press the MENU button (to display
special functions) followed by the Blue button; T**** will be displayed where the page number
is normally found.
Enter desired sub page number before the T**** disappears.
e.g., to select page 6 enter 0, 0, 0 and 6.
Press the Yellow button to view the TV picture whilst waiting for more sub pages to be found.
The sub pages found will be displayed across the top of the screen.
When the page is available, press the Yellow button to view the page. Regardless of how
many pages are found, pressing the Yellow button will take you to the sub page which you
requested.
Press the TEXT button to return to normal TV operation.
INDEX
When in FASTEXT operation
Press the INDEX button to return to the main index page.
Depending on the way information is transmitted, this may have to be pressed more than
once to return to the main index page.
Picture and text
Press the TEXT button, followed by the MULTI WINDOW button to move between viewing
teletext and the Picture and text mode.
Picture and text mode lets you see the current programme and a page of teletext side by
side. Whilst using this feature, the remote control affects the teletext page; if you wish to
make changes to the programme viewed press the TEXT button to return to watching the
programme on its own then make the desired changes.
DVB teletext services
DVB teletext services differ greatly from analogue teletext. When you switch to a DVB
teletext service, the images you see can contain graphics and text, laid out and controlled
in a manner decided by the broadcaster. In all cases, it is possible to navigate the pages
using buttons on the remote control, but because the commands available must apply to all
manufacturers of DVB equipment, some on screen commands may not correspond exactly
to the remote control buttons.
For example:
• For the on screen command 'select' or 'go', use the OK button.
• If you see the
• If you see a line of key words displayed in red, green, yellow and blue, use the coloured
multifunction buttons to operate the functions.
• For numbered options, use the numeric keypad.
• The TEXT button should allow you to exit the teletext system. Alternatively, press the
Channel up / down buttons to select another channel.
As soon as you switch to a DVB channel with links to a teletext service, software is downloaded
in the background to enable the teletext function. This means that when switching to a DVB
channel, you should wait for approximately 5 seconds before pressing the TEXT button
– this will allow the software to download. If you press the TEXT button before download is
complete, there will be a short delay before the text screen is displayed.
While navigating DVB teletext, you will fi nd there is a short delay when moving between
pages while the page downloads.
There is often a prompt shown somewhere on the page (for example "Loading") to let you
know what is happening.
symbols, use the appropriate cursor buttons.
51